For cured flower kept in a sealed jar, a 58% RH two-way humidity pack is the better default. A 62% RH pack wins during the first two to three weeks of curing and in dry climates where jars lose moisture fast. I compared the two levels on five criteria: cure stage, planned storage length, container and seal quality, local climate, and mold risk tied to water activity.

read more

How I Compared 58% and 62% RH

A humidity number only means something next to the rest of the setup. A jar opened twice a day behaves differently from one that sits closed for a month, and the same pack reads differently in a desert room than in a coastal one.

best humidity packs for cannabis

  • Cure stage: flower straight off the dry rack still needs to sweat and redistribute moisture through the buds.
  • Storage length: a two week hold versus a six month stash.
  • Container: mason jar, stainless canister, or a multilayer storage bag. Seal quality decides how hard the pack has to work.
  • Climate: dry rooms pull moisture out of the jar, humid rooms push it in.
  • Risk: water activity above roughly 0.65 supports mold and yeast growth, and 62% RH sits closer to that line than 58%.

Option 1: 58% RH Packs

Pros

  • Keeps the jar clear of the mold and yeast risk zone during long storage.
  • Flower stays dry enough to grind and roll without gumming up a grinder.
  • Holds steady in humid regions where a wetter target drifts upward.
  • Forgiving if you open the jar often and let room air in.

Cons

  • Freshly dried flower can feel crisp at first, before moisture redistributes.
  • Some smokers find the smoke harsher than flower held at a higher RH.
  • In very dry rooms the pack works harder and needs replacing sooner.

Use it if: your flower is already cured, you store for a month or longer, you live somewhere humid, or you have ever found fuzz on a bud.

cannabis storage humidity 58 vs 62

Option 2: 62% RH Packs

Pros

  • Better for the cure window, where buds need slow moisture movement to finish.
  • Keeps a soft, spongy texture that many smokers prefer for joints and blunts.
  • Slows moisture loss in dry climates and heated homes.
  • Good fit for flower headed to a press or a dry herb vaporizer.

Cons

  • Narrower margin to the water activity line, so a warm jar plus dense buds is a real risk.
  • Bud can feel damp and cling to a grinder.
  • Bad match for a jar that already reads over 62% when you seal it.
  • Long storage at 62% pairs poorly with high room temperatures.

Use it if: you are curing a fresh harvest, you live in a dry climate, or you plan to consume the jar within a few weeks.

best humidity packs for cannabis

Head to Head

Terpene retention

Both levels protect terpenes compared with an open bag or a paper sack. The difference is texture and volatility. A slightly drier jar loses aroma to the air each time you open it, while a wetter jar keeps volatile compounds in the bud but raises the chance of microbial spoilage that ruins the batch outright.

Mold and water activity

This is the deciding factor. Regulators test finished cannabis for water activity because mold, yeast, and bacteria need available water, not just visible dampness. Holding flower at 58% keeps a buffer under that threshold. Holding at 62% leaves less room for error, especially in a warm room or a jar packed tight with dense buds.

Texture and burn

At 58% the flower grinds clean and burns even. At 62% it feels fresher, rolls tighter, and vapes with more visible vapor, but it can also burn unevenly in a joint if the bud is still dense.

Option 3: Two Stage, Cure at 62%, Store at 58%

This is the approach I would recommend if you grow or buy in bulk. Run 62% through the cure so moisture evens out across the stems and buds, then switch to 58% for the months that follow.

  • Pros: full cure quality plus a wider safety margin for long storage.
  • Cons: two purchases, and you have to remember to swap the pack.

Use it if: you harvest at home or buy ounces at a time.

Option 4: Jar and Hygrometer Only

No pack, just a sealed jar and a small digital hygrometer inside.

  • Pros: cheapest setup, full visibility into what the jar is actually doing.
  • Cons: nothing buffers swings, so every open and close changes the reading.

Use it if: you are checking a cure or testing whether your jar seal is failing. Add a pack once you know your baseline.

Which One to Buy

  1. Cured flower, long storage, humid climate: 58% RH.
  2. Fresh harvest in the cure window, or a dry climate: 62% RH.
  3. Bulk grower: 62% for cure, then 58% for storage.
  4. Uncertain: start at 58%, watch the hygrometer for a week, and move up only if the bud feels brittle.

Keep jars in a dark spot between roughly 60 and 70 degrees Fahrenheit. Match pack size to jar volume using the maker's chart, and replace the pack when it stiffens or the hygrometer drifts off target.